Namazu-users-en(old)

[sandeep rao <sandeepr_namazu@xxxxxxxxx>]

Hi Folks,

 Sorry to bother you folks with that trivial question.
the problem was sorted after uninstalling the higer
Solaris version GCC & using the correct version

regards
Sandy

--- sandeep rao <sandeepr_namazu@xxxxxxxxx> wrote:
> Hi Folks,
> 
>  I am trying to install the chasen, kakasi,
> Text-Chasen, Text-kakasi, File-Mmagic, nkf171 &
> namazu
> modules on a Solaris2.6 machine. However after
> extracting the tar files when I run make I am
> encountering problems in  the form of errors given
> in
> the attachet txt file.
> 
>  Only the install of the file-mmagic is going
> through
> clean. One thing that I noticed is that the system
> OS
> is Sun Solaris2.6 however the GCC installed is
> /gcc-lib/sparc-sun-solaris2.8/3.0/ i.e. for
> Solaris2.8
> could that be the possible reason for the errors? or
> is there something else ? Any help is appreciated
> 
> thanks & regards
> Sandy
> 
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute
> with Yahoo! Messenger
> http://phonecard.yahoo.com/>
**************************On running make under 
> chasen-2.2.8:
> .
> .
> .
> chalib.c: In function `chasen_fparse_tostr':
> chalib.c:588: `fp_in' undeclared (first use in this
> function)
> chalib.c: At top level:
> chalib.c:617: parse error before "FILE"
> chalib.c: In function `cha_fgets':
> chalib.c:620: `s' undeclared (first use in this
> function)
> chalib.c:620: `n' undeclared (first use in this
> function)
> chalib.c:620: `fp' undeclared (first use in this
> function)
> make[2]: *** [chalib.lo] Error 1
> make[2]: Leaving directory
> `/opt/namazu-install/chasen-2.2.8/lib'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory
> `/opt/namazu-install/chasen-2.2.8'
> make: *** [all-recursive-am] Error 2
> #
> 
> 
> **************************On running make under 
> kakasi-2.2.8:
> .
> .
> .
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/stdio.h:285:
> parse error before '*' token
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/stdio.h:286:
> parse error before "FILE"
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/stdio.h:287:
> parse error before '*' token
> kakasi.c: In function `digest_out':
> kakasi.c:192: warning: implicit declaration of
> function `fflush'
> kakasi.c:192: `stdout' undeclared (first use in this
> function)
> kakasi.c:192: (Each undeclared identifier is
> reported only once
> kakasi.c:192: for each function it appears in.)
> kakasi.c: In function `main':
> kakasi.c:421: warning: implicit declaration of
> function `sprintf'
> kakasi.c:446: warning: implicit declaration of
> function `fprintf'
> kakasi.c:446: `stderr' undeclared (first use in this
> function)
> kakasi.c:527: `stdout' undeclared (first use in this
> function)
> make[2]: *** [kakasi.o] Error 1
> make[2]: Leaving directory
> `/opt/namazu-install/kakasi-2.3.3/src'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory
> `/opt/namazu-install/kakasi-2.3.3'
> make: *** [all-recursive-am] Error 2
> #
> 
> **************************On running perl under 
> Text-ChaSen:
> Checking if your kit is complete...
> Looks good
> Note (probably harmless): No library found for
> -lchasen
> Writing Makefile for Text::ChaSen
> #
> 
> 
> **************************On running make install
> under  Text-ChaSen:
> .
> .
> .
>
usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/proto.h:909:
> parse error before "FILE"
> In file included from
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/perl.h:2850,
>                  from ChaSen.xs:13:
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/intrpvar.h:197:
> parse error before '*' token
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/intrpvar.h:197:
> warning: data definition has no type
>  or storage class
> ChaSen.xs:28: parse error before "FILE"
> ChaSen.xs:33: parse error before '*' token
> ChaSen.xs:34: parse error before "FILE"
> ChaSen.xs:36: parse error before '*' token
> ChaSen.xs: In function
> `XS_Text__ChaSen_fparse_tostr':
> ChaSen.xs:90: `fp' undeclared (first use in this
> function)
> ChaSen.xs:90: (Each undeclared identifier is
> reported only once
> ChaSen.xs:90: for each function it appears in.)
> make: *** [ChaSen.o] Error 1
> #
> 
> **************************On running perl under 
> Text-kakasi:
> # perl Makefile.PL
> Checking if your kit is complete...
> Looks good
> Note (probably harmless): No library found for
> -lkakasi
> Writing Makefile for Text::Kakasi
> #
> 
> **************************On running make install
> under  Text-kakasi:
> .
> .
> .
> .
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/proto.h:908:
> parse error before "FILE"
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/proto.h:909:
> parse error before "FILE"
> In file included from
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/perl.h:2850,
>                  from Kakasi.xs:27:
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/intrpvar.h:197:
> parse error before '*' token
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/intrpvar.h:197:
> warning: data definition has no type
>  or storage class
> Kakasi.xs:38:23: libkakasi.h:
> ?t?@?C???à?f?B???N?g???à? ?è?Ü?¹?ñ?B
> Kakasi.xs: In function `XS_Text__Kakasi_do_kakasi':
> Kakasi.xs:86: warning: assignment makes pointer from
> integer without a cast
> make: *** [Kakasi.o] Error 1
> #
> 
> **************************On running make install
> under  File-MMAGIC:
> # cd File-MMagic-1.13
> # perl Makefile.PL
> Writing Makefile for File::MMagic
> # make install
> Manifying blib/man3/File::MMagic.3
> Installing /usr/local/man/man3/File::MMagic.3
> Writing
>
/usr/local/lib/perl5/site_perl/5.6.1/sun4-solaris/auto/File/MMagic/.packlist
> Appending installation info to
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/perllocal.pod
> #
> 
> 
> **************************On running make install
> under  NKF171:
> cp NKF.pm blib/lib/NKF.pm
> /usr/local/bin/perl
> -I/usr/local/lib/perl5/5.6.1/sun4-solaris
> -I/usr/local/lib/perl5/5.6.1 /usr/l
> ocal/lib/perl5/5.6.1/ExtUtils/xsubpp  -typemap
> /usr/local/lib/perl5/5.6.1/ExtUtils/typemap NKF.xs
>  > NKF.xsc && mv NKF.xsc NKF.c
> gcc -c  -fno-strict-aliasing -I/usr/local/include
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O
>  -DVERSION=\"0.01\" -DXS_VERSION=\"0.01\" -fPIC
> -I/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE  N
> KF.c
> In file included from
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/limits.h:11,
>                  from
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/perl.h:1127,
>                  from NKF.xs:5:
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/syslimits.h:29:28:
> iso/limits_iso.h: ?t?@
> ?C???à?f?B???N?g???à? ?è?Ü?¹?ñ?B
> In file included from
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/perlsdio.h:5,
>                  from
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/iperlsys.h:300,
>                  from
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/perl.h:1947,
>                  from NKF.xs:5:
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/stdio.h:36:27:
> iso/stdio_iso.h: ?t?@?C??
> ?à?f?B???N?g???à? ?è?Ü?¹?ñ?B
> In file included from
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/perlsdio.h:5,
>                  from
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/iperlsys.h:300,
>                  from
>
/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE/perl.h:1947,
>                  from NKF.xs:5:
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/stdio.h:123:
> parse error before "fpos64_t
> "
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/stdio.h:168:
> parse error before '*' token
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/stdio.h:169:
> parse error before '*' token
>
/usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.0/include/stdio.h:169:
> parse 
=== message truncated ===


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/