# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)

    FontPath   "/usr/X11R6/lib/X11/fonts/local"
    FontPath   "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath   "/usr/X11R6/lib/X11/fonts/japanese"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi"

    FontPath "/usr/X11R6/lib/X11/fonts/kaname/"
EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol    "Standard"

    # when using XQUEUE, comment out the above line, and uncomment the
    # following line
    #Protocol   "Xqueue"

    AutoRepeat  500 5

    # Let the server do the NumLock processing.  This should only be 
    # required when using pre-R6 clients
    #ServerNumLock

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #Xleds      1 2 3

    #To set the LeftAlt to Meta, RightAlt key to ModeShift, 
    #RightCtl key to Compose, and ScrollLock key to ModeLock:

    #LeftAlt        Meta
    #RightAlt       Meta
    #ScrollLock      Compose
    #RightCtl        Control

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    XkbModel    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    XkbModel    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    XkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVariant  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    XkbOptions  "ctrl:swapcaps"
     XkbOptions  "ctrl:nocaps"

# These are the default XKB settings for XFree86
#    XkbRules    "xfree86"
#    XkbModel    "pc101"
#    XkbLayout   "us"
#    XkbVariant  ""
#    XkbOptions  ""

   XkbKeycodes     "xfree86"
   XkbModel        "jp106"
   XkbLayout       "jp"
EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "IMPS/2"
    Device      "/dev/mumse"
    ZaxisMapping 5 4

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate	9600
#    SampleRate	150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Emulate3Buttons
#    Emulate3Timeout    50

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

Section "Monitor"

    Identifier  "Internal LCD Panel"
    VendorName  "TOSHIBA"
    ModelName   "TOSHIBA"

    HorizSync   31-60

    VertRefresh 50.0-90.0

Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
ModeLine "800x600"     36     800  824  896 1024   600  601  603  625

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier  "NeoMagic NM2200"
    VendorName  "NeoMagic"
    BoardName   "NeoMagic"

#    Option     "linear"
#    Option     "nolinear"
#    Option     "sw_cursor"
#    Option     "hw_cursor"
#    Option     "no_accel"
#    Option     "intern_disp"
#    Option     "extern_disp"
#    Option     "mmio"
#    Option     "no_mmio"
    Option     "lcd_center"
    Option     "no_stretch"
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
    Driver      "svga"
    Device      "NeoMagic NM2200"
    Monitor     "Internal LCD Panel"
    Subsection  "Display"
        Depth       24
#       Modes       "800x600" "640x480"
        Modes       "800x600"
        ViewPort    0 0
#       Virtual     800 600
    EndSubsection
EndSection